![]() ![]() Only change this if your magnetsize differs a lot. Otherwise use the tolerance values to change the hole size! Just click OK for the dialog and save the file on you PC. Maybe you have to change the file format from 3MF to STL, if you want to. Right click on that again and select Save as Mesh. Select Find in Browser and the Browser at the left will expand to the body you just selected. Therefore simply right click on the part you want to export. Now all that’s left is to export the new STL file. If you’re not sure how the feature should look, open an unmodified version of the Klack and use that as a reference. To do this, double-click on the feature in the timeline and try to get things right. While you will most likely do not need to fix the yellow errors, you will need to fix the red errors. Red means a failed feature because something is missing, for example, an edge for a chamfer or a profile for an extrude. The feature still works, but it’s worth checking to see if the program transferred it correctly. There are two types of errors: yellow and red. However, most failed features are just cosmetics like fillets or chamfers, and the design should still be functional. I have done several tests with the Basic Check Variables, but nothing is perfect. There are many dependencies in the design that can cause problems when parameters are changed. Parametric design is powerful, but not perfect. Once you’ve made your changes click OK in the bottom right corner. In order to change a value simply double click on a value in the Expression column. At the top you will find the Favorites tab where I placed the most important parameters. You will find a long list with many variables to adapt the design. You can find a list with all variables at the end of this page. With these you can go way beyond the Basic-Check-Variables to adapt the design. ![]() In there you an find all the parameters / variables you can adapt to get this design compatible with your printer. Then open the file, it should look close to this:Ĭlick on Modify > fx Change Parameters and fusion opens a new window. ![]() Simply double click on the file or upload it to the browser in fusion on the left side (once you opened a folder e.g. ‘ My First Project‘ there’s a small blue upload option at the very top). – Autodesk Fusion 360 account ( Free personal license is fine)įirst you have upload the file to fusion. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |